Right , Wellie first ,

Wellie came in for Half shafts , normal new bearings, seals, and reset, and its brakes to be relined and set up and balanced, front wheel bearings  and the fuel system cleaned out , and just a quick tweak , then a quick blast with the pressure washer ,

pressure washers and old paint don't really go together

they tend to blast off the paint if you get to close

any all went well and Wellie was delivered back to its owner yesterday morning

seems he was very pleased with the tractors brakes ,cool another happy costumer.

Daisy may . to give it its full name, seems to have a bit of a problem with her motor

main bearings, big ends ,normal test sump off put a bar between the fly wheel and press down on the bar ,

nicely, does it put a dial gadge on the flywheel and watch how much the flywheel lifts

mills is bad ,ha ha ha ,any way I took the motor off and started to strip it out

diesel`s are ok but you have to take the whole motor apart to get the crank out

not an easy job , these motors are not light , and the crank comes out the fly wheel end of the block

pics of that later ,

anyway this is how it looks now ,

The bell housing

you can see the oil coming from the rear crank seal

And the front end , cam chain and wheels

So there you go , other stuff Dj`s heads been skimmed and ready

Seems it might have a cracked liner tho so thats next on that

And ive got this in to play with its not grey but it soon will be ha ha ha ,

And now a few pics from last weekend due ,

Nutty jo, the woman wont sit still,

sunsets daughter filling her face

And Bee look no hat

and jo at it again

Jo lived just down the road from me in my home town , so that makes her nuts anyway

Right more stuff and things later and im off to either castle rigg or stone henge not desided yet

this weekend all good stuff ,